How Have Success With Drip Irrigation

Good advice and tips from commercial irrigation maintenance companies in Northern Virginia will provide you with the information necessary for you to make the right choice regarding your drip irrigation system. For instance, do not buy a pump just because it is cheap. You need to consider whether it is durable and what the noise level will be like during operation. If you are using a pipe with a large diameter you may need a larger pump, depending on the irrigation system you choose.

Many people lose the incredible benefits of having a drip irrigation system because of a few mistakes that are completely avoidable. There are several things that one can do to ensure that you get the most from having a dripper system. There is no question that watering your lawns or plants with the use of a drip irrigation system is far more effective than sprinklers and also more efficient as far as water management is concerned. It is estimated that drip irrigation that has been installed and correctly applied is able to save up to 20% of the water that may be lost in runoff, in particular with the watering of shrubs and trees. There are however, three aspects that if not addressed properly for the home gardener, will mean that the great benefits of drip irrigation are not attained.

Commercial drip irrigation companies in Northern Virginia will tell you that drip irrigation should operate at as low pressure as possible. A pressure of 1.5 bars is all that is required in small, private gardens. A pressure regulator has to be installed at the system’s head unit for this purpose. Sometimes the dripper line itself is too long and barely emits water at the end of the line. This is not because of insufficient pressure as some would think. The correct method of use is to connect several shorter lines to a feeder or supply pipe and not snake several lines around the plants. Fifteen meters or 45 ft is the acceptable length of each dripper line. It should not be longer for most home gardens. Micro-drippers are a lot less.

The dripper lines should also be evenly spaced and parallel to each other. The distance between the lines does not have to equal the distance between the drippers. In light, sandy soil, where the water moves vertically, spacing between the rows needs to be a lot closer. In heavy soil where water spreads laterally the line can be laid up to a meter from each if drippers are spaced at 0.5m.

The whole purpose of the drip irrigation is for water to be applied at a rate which the soil is able to absorb it. At the same time, it is supplying an even cover of moisture for the roots of the plant. Knowing the flow rate of individual drippers is important for precisely this reason. Choosing those with the lowest flow rate available, especially in heavy clay soils and on slopes, is best. It is best to use micro-drippers where the flow rate is 1 liter per hour, for flowers and where complete coverage is necessary.

Commercial drip irrigation companies in Northern Virginia will tell you that blockages are the main problem associated with drippers. It is for this reason that a filter that has been designed for drip irrigation and should always be installed. It is wise to flush the lines at least once or twice each year. The result of this will be an extended lifespan of the drip irrigation system, up to about 10-15 years. Blockages will be the result after 2-3 years if this simple procedure is not carried out. Mineral deposits accumulate over time and block up the drippers.

The success of your drip irrigation will not only depend on the above, but also the kind of system you choose to install. You should make sure you are well informed about different types of irrigation systems before you go out shopping for one. There are a number of factors that you will need to consider before you make your final decision. Your choice will have to be right for your garden and you will need to be able to use it. Above all else, you need to get the result that you want.